Caterpillar Performance Handbook, January 2017, SEBD0351-47

Cat Industrial Diesel Applications

Engines

Cat Industrial Diesel Applications Meets U.S. EPATier 4 Final, EU Stage IIIB or Stage IV emission standards

“IND A” “IND E” bkW bhp rpm bkW bhp rpm bkW bhp rpm bkW bhp rpm bkW bhp rpm “IND B” “IND C” “IND D”

Model Type C0.5 NA

— — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— 8.2 — 8.8 — 10.2 — 12.2 — 13.2 — 15.3 — 13.7 — 14.7 — 16.1 — 16.8 — 17.2 — 17.7 — 18.4 — 19.7 — 21.0 — 18.4 — 20.7 — 23.4 — 24.4 — 25.1 — 23.1 — 25.2 — 27.0 — 27.3 — 27.6 — 29.4 — 30.0

2800* — 3000* — 3600* — 2800* — 3000* — 3600* — 2200* — 2200* — 2400* — 2800* — 2600* — 3000* — 2800 — 3000* — 3400* — 2100 — 2200* — 2600* — 2800* — 3000* — 2200* — 2400 — 2800 — 2600* — 3000 — 2800* — 3000* —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — —

11.0 11.8 13.7 16.4 17.7 20.5 18.4 19.7 21.6 22.5 23.0 23.7 24.7 26.4 28.2 24.7 27.8 31.4 32.7 33.7 31.0 33.8 36.2 36.6 37.0 39.4 40.2

— — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — —

4

C0.7 NA

C1.1 NA

C1.5 NA

C1.5 T

Rating Conditions: Diesel Engines — up to 7.1 liter All rating conditions are based on ISO/TR14396, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg) , with a vapor pressure of 1 kPa (0.295 in Hg) , and 25° C (77° F) . Performance measured using fuel to EPA specifications in 40 CFR Part 1065 and EU specifications in Directive 97/68/EC with a density of 0.845-0.850 kg/L @ 15° C (59° F) and fuel inlet temperature 40° C (104° F) . Diesel Engines — greater than 7.1 liter All rating conditions are based on SAE J1995, inlet air standard conditions of 99 kPa (29.31 in Hg) dry barometer and 25° C (77° F) temperature. Performance measured using a standard fuel with fuel gravity of 35° API having a lower heating value of 42 780 kJ/kg (18,390 btu/lb) when used at 29° C (84.2° F) with a density of 838.9 g/L

Diesel Engine Rating Definitions Explanation of Ratings A, B, C, D, and E: • For an exact determination of the appropriate rating, contact your local Cat dealer. Engine rating obtained and presented in accordance with ISO 3046/1. IND-A (Continuous) • Continuous heavy-duty service where the engine is operated at maximum power and speed up to 100% of the time without interruption or load cycling. IND-B • For service where power and/or speed are cyclic (time at full load not to exceed 80%). IND-C (Intermittent) • Intermittent service where maximum power and/or speed are cyclic (time at full load not to exceed 50%).

IND-D • For service where maximum power is required for periodic overloads (time at full load not to exceed 10% of the duty cycle). IND-E • For service where maximum power is required for a short time for initial starting or sudden overload. For emergency service where standard power is unavailable (time at full load not to exceed 5% of the duty cycle).

NA — Naturally Aspirated bhp — Brake horsepower bkW — Brake kilowatts

*Denotes rating is available in EU and other global regulated and non-regulated areas (Non-U.S.).

Edition 47 4-21