Caterpillar Performance Handbook, January 2017, SEBD0351-47

Performance Data ● 918M Standard Lift

Wheel Loaders IntegratedToolcarriers

BucketType

General Purpose

IT Quick Coupler

ISO 23727 Quick Coupler Bolt-on Cutting Edges

Ground EngagingType Rated capacity 100%

Bolt-on Cutting Edges

m 3 1.3 1.3 1.5 1.6 1.7 1.9 1.3 1.5 1.7 1.9 yd 3 1.7 1.7 2.0 2.1 2.2 2.5 1.7 2.0 2.2 2.5 m 3 1.4 1.4 1.6 1.7 1.8 2.0 1.4 1.6 1.8 2.0 yd 3 1.8 1.8 2.1 2.2 2.4 2.6 1.8 2.1 2.4 2.6 m 3 1.15 1.15 1.35 1.45 1.55 1.75 1.15 1.35 1.55 1.75 yd 3 1.5 1.5 1.8 1.9 2.0 2.3 1.5 1.8 2.0 2.3 mm 2320 2401 2401 2401 2401 2401 2401 2401 2401 2401 ft/in 7'7" 7'10" 7'10" 7'10" 7'10" 7'10" 7'10" 7'10" 7'10" 7'10" 2291 2297 1965 1832 1713 1506 2245 1921 1671 1472 3862 3872 3248 3076 2918 2522 3784 3175 2845 2466 2128 2133 1842 1724 1618 1430 2085 1801 1578 1399 3880 3890 3291 3124 2845 2580 3802 3217 2775 2522 mm 2923 2954 2891 2865 2838 2780 2916 2854 2800 2754 ft/in 9'7" 9'8" 9'5" 9'4" 9'3" 9'1" 9'6" 9'4" 9'2" 9'0" 865 842 889 911 933 966 886 931 974 1013 ft/in 2'10" 2'9" 2'11" 2'11" 3'0" 3'2" 2'10" 3'0" 3'2" 3'3" mm 1498 1491 1506 1514 1521 1521 1515 1528 1541 1553 ft/in 4'10" 4'10" 4'11" 4'11" 4'11" 4'11" 4'11" 5'0" 5'0" 5'1" mm 2199 2159 2239 2274 2310 2378 2217 2295 2366 2428 ft/in 7'2" 7'1" 7'4" 7'5" 7'6" 7'9" 7'3" 7'6" 7'9" 7'11" mm 62 62 61 61 61 60 61 61 61 60 in 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 mm 6541 6501 6581 6615 6652 6719 6558 6637 6708 6768 ft/in 21'5" 21'3" 21'7" 21'8" 21'9" 22'0" 21'6" 21'9" 22'0" 22'2" mm 4725 4707 4790 4797 4847 4928 4743 4811 4882 4962 ft/in 15'6" 15'5" 15'8" 15'8" 15'10" 16'1" 15'6" 15'9" 16'0" 16'3" mm 5340 5365 5389 5399 5410 5434 5380 5404 5425 5445 ft/in 17'6" 17'7" 17'8" 17'8" 17'8" 17'9" 17'7" 17'8" 17'9" 17'10" kg 7047 7066 6981 6944 6903 6790 6912 6829 6740 6648 lb 15,531 15,572 15,385 15,304 15,214 14,964 15,233 15,051 14,855 14,651 kg 7340 7360 7271 7233 7191 7073 7200 7114 7021 6925 lb 16,178 16,221 16,026 15,942 15,848 15,588 15,867 15,678 15,474 15,261 kg 5957 5973 5895 5862 5825 5722 5838 5763 5681 5594 lb 13,130 13,164 12,993 12,920 12,837 12,611 12,866 12,700 12,520 12,329 kg 6338 6354 6272 6236 6197 6087 6211 6130 6043 5951 lb 13,968 14,004 13,822 13,744 13,657 13,416 13,688 13,511 13,319 13,116 kg 9541 9957 9116 8795 8480 7875 9325 8588 7933 7515 lbf 21,028 21,945 20,090 19,384 18,690 17,356 20,553 18,928 17,484 16,563 kg 9391 9395 9435 9451 9469 9523 9418 9456 9491 9545 lb 20,698 20,707 20,794 20,829 20,869 20,987 20,756 20,841 20,917 21,037 mm

Rated capacity 110%

Struck capacity

Width: bucket

23

Nominal material density, 100% fill factor Nominal material density, 110% fill factor Clearance: full lift, 45° dump

kg/m 3 lb/yd 3 kg/m 3 lb/yd 3

Reach: full lift, 45° dump

Reach: 2130 mm (7'0") clearance, 45° dump Reach: level arm, level bucket

Dig depth

Length: overall

Height: overall

Turning radius, bucket at carry

Tipping load — straight, ISO 14397-1*

Tipping load — straight, rigid tire**

Tipping load — full turn, ISO 14397-1*

Tipping load — full turn, rigid tire**

Breakout force

Operating weight

*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing. **Compliance to ISO 14397-1 (2007) Sections 1 thru 5. NOTE: Dimensions listed are for a 918M configured with buckets, bolt-on cutting edges, optional counterweights, additional guarding, 80 kg (176 lb) operator, and Michelin 17.5 R25 (L2) XTLA tires at a pressure of 4.14 bar (60 psi) in the front tires and 2.76 bar (40 psi) in the rear tires.

Edition 47 23-47