Caterpillar Performance Handbook, January 2017, SEBD0351-47

Performance Data ● 980L/980M Aggregate Handler**

Wheel Loaders IntegratedToolcarriers

Material Handling — Pin On

BucketType

General Purpose — Pin On

Coal — Pin On Bolt-on Cutting Edges

Bolt-on Cutting Edges

Bolt-on Cutting Edges

Bolt-on Cutting Edges

EdgeType

Capacity — rated

5.70 7.46 6.27 8.20 3447 11'3" 3204 10'6" 1529

6.00 7.85 6.60 8.63 3447 11'3" 3187 10'5" 1550

5.70 7.46 6.27 8.20 3447 11'3" 3105 10'2" 1444 4'8" 3074 10'1"

8.20

m 3 yd 3 m 3 yd 3

10.73

Capacity — 110%

9.02

11.80 3638 11'11"

Width

mm ft/in mm ft/in mm ft/in mm ft/in mm mm ft/in mm ft/in mm ft/in in

Dump clearance at maximum lift and 45° discharge

2917

9'6"

Reach at maximum lift and 45° discharge

1625

5'0"

5'1"

5'3"

Reach at level lift arm and bucket level

3049 10'0"

3077 10'1"

3336

10'11"

Digging depth

103

103

103

108 4.2

4

4

4

Overall length

9638 31'8" 6243 20'6"

9666 31'9" 6269 20'7"

9663 31'9" 6242 20'6"

9928 32'7" 6536 21'6"

Overall height with bucket at maximum lift

Loader clearance circle with bucket at carry position Static tipping load, straight (ISO)*

15 270

15 285

15 284

15 609

50'2"

50'2"

50'2"

51'3"

23 972 52,835 25 481 56,161 20 630 45,470 21 997 48,482 47,618 30 822 67,931 211

23 827 52,515 25 339 55,847 20 491 45,162 21 860 48,180 46,676 30 918 68,143 207

23 447 51,677 24 909 54,901 20 163 44,440 21 488 47,360 46,782 30 947 68,207 208

23 180 51,088 24 750 54,550 19 857 43,765 21 286 46,914

kg

lb

Static tipping load, straight (rigid tire)*

kg

lb

Static tipping load, articulated (ISO)*

kg

lb

Static tipping load, articulated (rigid tire)*

kg

lb

Breakout force (§)

175

kN lbf kg

39,467 31 326

Operating weight*

lb 69,042 *Static tipping loads and operating weights shown are based on a machine configuration with Michelin 29.5R25 XLDD1 L4 radial tires, full fluids, operator, aggregate counterweight, cold start, roading fenders, Product Link, limited slip differentials, power train guard, secondary steering and sound suppression. If a rock bucket is added, those values are with Michelin 26.5R25 XLDD2 L5 tires. **Aggregate Handler configuration is not compatible with teeth and segments, tips, rock buckets, high lift, L5 tires. (§) Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C. (§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C governing loader ratings. (ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing. (RigidTire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.

NOTE: Machine and bucket availability varies by region. Consult your local dealer for availability.

23-164 Edition 47