Caterpillar Performance Handbook, January 2017, SEBD0351-47

Performance Data ● 982M Aggregate Handler**

Wheel Loaders IntegratedToolcarriers

BucketType

Material Handling — Heavy Duty

Woodchip

Coal

Bolt-on Cutting Edges

Bolt-on Cutting Edges

Bolt-on Cutting Edges

Bolt-on Cutting Edges

EdgeType

Capacity — rated

6.40 8.37 7.04 9.21 3602 11'9" 3264 10'8" 1518 4'11" 3311

7.00 9.16 7.70

12.00 15.70 13.20 17.26 4174 13'8" 3022 9'10" 1738

8.80

m 3 yd 3 m 3 yd 3

11.51

Capacity — 110%

9.68

10.07 3602 11'9" 3200 10'6" 1581 5'2" 3401 11'1"

12.66 3639 11'11" 3017 9'10" 1743

Width

mm ft/in mm ft/in mm ft/in mm ft/in mm mm ft/in mm ft/in mm ft/in in

Dump clearance at maximum lift and 45° discharge

Reach at maximum lift and 45° discharge

5'8"

5'8"

Reach at level lift arm and bucket level

3638

3645

10'10"

11'11"

11'11"

Digging depth

104 4.1

104 4.1

119 4.7

119 4.7

Overall length

10 331 33'11"

10 421

10 668

10 675 35'1" 6962 22'11" 16 049 24 604 54,228 26 018 57,344 20 758 45,751 22 181 48,888 52'8"

34'3" 6709 22'1"

35'0" 7059 23'2"

Overall height with bucket at maximum lift

6622 21'9"

Loader clearance circle with bucket at carry position

15 794 51'10" 24 813 54,689 26 181 57,704 20 907 46,079 22 285 49,116 55,612 37 148 81,873 247

15 850

16 516

52'0"

54'3"

Static tipping load, straight (ISO)*

24 471 53,935 25 850 56,973 20 578 45,354 21 966 48,414 52,320 37 355 82,330 232

24 878 54,831 26 392 58,170 20 937 46,145 22 456 49,493 45,653 37 159 81,899 203

kg

lb

Static tipping load, straight (rigid tire)*

kg

lb

Static tipping load, articulated (ISO)*

kg

lb

Static tipping load, articulated (rigid tire)*

kg

lb

Breakout force (§)

203

kN lbf kg

45,761 36 880

Operating weight*

lb 81,284 *Static tipping loads and operating weights shown are based on a machine configuration with Bridgestone 875/65R29VLTS L4 radial tires, full fluids, operator, aggregate counterweight, cold start, roading fenders, Product Link, limited slip differentials, power train guard, secondary steering and sound suppression. **Aggregate Handler configuration is not compatible with teeth and segments, tips, rock buckets, high lift, L5 tires. (§) Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C. (§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C governing loader ratings. (ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing. (RigidTire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.

NOTE: Machine and bucket availability varies by region. Consult your local dealer for availability.

23-168 Edition 47