Caterpillar Performance Handbook, January 2017, SEBD0351-47

Performance Data ● 950K

Wheel Loaders IntegratedToolcarriers

BucketType

General Purpose — Fusion QC

Bolt-on Cutting Edges

Bolt-on Cutting Edges

Bolt-on Cutting Edges

Teeth & Segments Teeth

Teeth & Segments Teeth

Teeth & Segments Teeth

EdgeType

Capacity — rated (§)

3.40 4.45 3.04 3.98

3.40 4.45 3.04 3.98

3.20 4.19 2.81 3.68

3.60 4.71 3.18 4.16

3.60 4.71 3.18 4.16

3.40 4.45 2.94 3.85

3.80 4.97 3.36 4.39

3.80 4.97 3.36 4.39

3.60 4.71 3.12 4.08

m 3 yd 3 m 3 yd 3

Capacity — struck (§)

Width (§)

mm 2927 2994 2994 2927 2994 2994 2927 2994 2994 ft/in 9'7" 9'9" 9'9" 9'7" 9'9" 9'9" 9'7" 9'9" 9'9" mm 2779 2660 2660 2753 2633 2633 2718 2598 2598 ft/in 9'1" 8'8" 8'8" 9'0" 8'7" 8'7" 8'11" 8'6" 8'6" mm 1518 1627 1627 1539 1648 1648 1568 1677 1677 ft/in 4'11" 5'4" 5'4" 5'0" 5'4" 5'4" 5'1" 5'6" 5'6" mm 2821 2982 2982 2856 3017 3017 2902 3063 3063 ft/in 9'3" 9'9" 9'9" 9'4" 9'10" 9'10" 9'6" 10'0" 10'0" mm 8295 8468 8468 8330 8503 8503 8376 8549 8549 ft/in 27'3" 27'10" 27'10" 27'4" 27'11" 27'11" 27'6" 28'1" 28'1" mm 5630 5630 5630 5664 5664 5664 5711 5711 5711 ft/in 18'6" 18'6" 18'6" 18'7" 18'7" 18'7" 18'9" 18'9" 18'9" mm 13 833 14 006 14 006 13 854 14 028 14 028 13 883 14 057 14 057 ft/in 45'5" 46'0" 46'0" 45'6" 46'1" 46'1" 45'7" 46'2" 46'2" kg 12 023 11 881 12 209 11 957 11 815 12 142 11 871 11 728 12 054 lb 26,499 26,187 26,908 26,355 26,041 26,761 26,165 25,849 26,567 kg 12 767 12 624 12 964 12 703 12 559 12 898 12 619 12 474 12 812 lb 28,139 27,823 28,572 27,998 27,681 28,428 27,813 27,494 28,239 kg 10 322 10 181 10 491 10 260 10 118 10 428 10 178 10 035 10 344 lb 22,751 22,439 23,123 22,614 22,301 22,983 22,434 22,118 22,799 kg 11 081 10 938 11 260 11 021 10 877 11 199 10 941 10 796 11 117 lb 24,424 24,108 24,818 24,290 23,973 24,682 24,114 23,795 24,502 146 lbf 32,517 32,240 35,060 31,655 31,379 34,072 30,581 30,306 32,844 kg 19 964 20 072 19 915 19 998 20 106 19 949 20 043 20 151 19 994 lb 44,001 44,239 43,893 44,076 44,314 43,968 44,175 44,413 44,067 kN 144 143 156 140 139 151 136 134 mm 90 90 60 90 90 60 90 90 60 in 3.5 3.5 2.3 3.5 3.5 2.3 3.5 3.5 2.3

23

Dump clearance at maximum lift and 45° discharge (§)

Reach at maximum lift and 45° discharge (§) Reach at level lift arm and bucket level (§)

Digging depth (§)

Overall length

Overall height with bucket at maximum lift Loader clearance circle with bucket at carry position (§)

Static tipping load, straight (ISO)* Static tipping load, Static tipping load, articulated (ISO)* Static tipping load, straight (rigid tire)*

articulated (rigid tire)*

Breakout force** (§)

Operating weight*

* *Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression. **Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C. (§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C governing loader ratings. (ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing. (Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.

NOTE: Bucket availability varies by region. Consult your local dealer for availability.

Edition 47 23-175