Caterpillar Performance Handbook, January 2017, SEBD0351-47

Performance Data ● 962K

Wheel Loaders IntegratedToolcarriers

BucketType

General Purpose — Pin On

Bolt-on Cutting Edges

Bolt-on Cutting Edges

Bolt-on Cutting Edges

Teeth & Segments Teeth

Teeth & Segments Teeth

Teeth & Segments Teeth

EdgeType

Capacity — rated (§)

2.70 3.53 2.30 3.01

2.70 3.53 2.30 3.01

2.50 3.27 2.11 2.76

2.90 3.79 2.55 3.34

2.90 3.79 2.55 3.34

2.70 3.53 2.33 3.05

3.10 4.05 2.76 3.61

3.10 4.05 2.76 3.61

2.90 3.79 2.54 3.32

m 3 yd 3 m 3 yd 3

Capacity — struck (§)

Width (§)

mm 2927 2994 2994 2927 2994 2994 2927 2994 2994 ft/in 9'7" 9'9" 9'9" 9'7" 9'9" 9'9" 9'7" 9'9" 9'9" mm 3191 3076 3076 3136 3019 3019 3093 2975 2975 ft/in 10'5" 10'1" 10'1" 10'3" 9'10" 9'10" 10'1" 9'9" 9'9" mm 1290 1403 1403 1328 1440 1440 1363 1474 1474 ft/in 4'2" 4'7" 4'7" 4'4" 4'8" 4'8" 4'5" 4'10" 4'10" mm 2660 2821 2821 2729 2890 2890 2786 2947 2947 ft/in 8'8" 9'3" 9'3" 8'11" 9'5" 9'5" 9'1" 9'8" 9'8" mm 8307 8479 8479 8376 8548 8548 8433 8605 8605 ft/in 27'4" 27'10" 27'10" 27'6" 28'1" 28'1" 27'8" 28'3" 28'3" mm 5609 5609 5609 5681 5681 5681 5742 5742 5742 ft/in 18'5" 18'5" 18'5" 18'8" 18'8" 18'8" 18'11" 18'11" 18'11" mm 13 785 13 953 13 953 13 825 13 995 13 995 13 859 14 029 14 029 ft/in 45'3" 45'10" 45'10" 45'5" 45'11" 45'11" 45'6" 46'1" 46'1" kg 14 003 13 866 14 174 13 854 13 716 14 017 13 753 13 613 13 906 lb 30,863 30,561 31,240 30,536 30,230 30,893 30,312 30,005 30,651 kg 14 746 14 608 14 925 14 601 14 461 14 770 14 502 14 362 14 662 lb 32,501 32,196 32,895 32,180 31,872 32,553 31,964 31,654 32,316 kg 12 053 11 916 12 203 11 910 11 772 12 053 11 816 11 677 11 950 lb 26,565 26,262 26,897 26,251 25,946 26,565 26,043 25,736 26,339 kg 12 817 12 679 12 974 12 678 12 538 12 827 12 587 12 446 12 726 lb 28,249 27,944 28,596 27,942 27,634 28,270 27,742 27,431 28,050 190 lbf 43,943 43,707 48,225 41,302 41,066 45,092 39,361 39,125 42,810 kg 20 252 20 360 20 203 20 336 20 444 20 287 20 373 20 481 20 324 lb 44,634 44,872 44,526 44,821 45,059 44,713 44,902 45,140 44,794 kN 195 194 214 183 182 200 175 174 mm 88 88 58 88 88 58 88 88 58 in 3.5 3.5 2.3 3.5 3.5 2.3 3.5 3.5 2.3

23

Dump clearance at maximum lift and 45° discharge (§)

Reach at maximum lift and 45° discharge (§) Reach at level lift arm and bucket level (§)

Digging depth (§)

Overall length

Overall height with bucket at maximum lift Loader clearance circle with bucket at carry position (§)

Static tipping load, straight (ISO)* Static tipping load, Static tipping load, articulated (ISO)* Static tipping load, straight (rigid tire)*

articulated (rigid tire)*

Breakout force** (§)

Operating weight*

* *Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression. **Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C. (§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C governing loader ratings. (ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing. (Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.

NOTE: Bucket availability varies by region. Consult your local dealer for availability.

Edition 47 23-179