Caterpillar Performance Handbook, January 2017, SEBD0351-47

Performance Data ● 962K

Wheel Loaders IntegratedToolcarriers

BucketType

Material Handling — Pin On

General Purpose — Fusion QC

Bolt-on Cutting Edges

Bolt-on Cutting Edges

Bolt-on Cutting Edges

Teeth & Segments Teeth

Teeth & Segments Teeth

Teeth & Segments Teeth

EdgeType

Capacity — rated (§)

3.60 4.71 3.15 4.12

3.60 4.71 3.15 4.12

3.40 4.45 2.95 3.86

3.80 4.97 3.28 4.29

3.80 4.97 3.28 4.29

3.60 4.71 3.11 4.07

2.70 3.53 2.30 3.01

2.70 3.53 2.30 3.01

2.50 3.27 2.11 2.76

m 3 yd 3 m 3 yd 3

Capacity — struck (§)

Width (§)

mm 2927 2994 2994 2927 2994 2994 2927 2994 2994 ft/in 9'7" 9'9" 9'9" 9'7" 9'9" 9'9" 9'7" 9'9" 9'9" mm 2946 2821 2821 2910 2785 2785 3153 3037 3037 ft/in 9'8" 9'3" 9'3" 9'6" 9'1" 9'1" 10'4" 9'11" 9'11" mm 1372 1474 1474 1408 1510 1510 1336 1449 1449 ft/in 4'6" 4'10" 4'10" 4'7" 4'11" 4'11" 4'4" 4'9" 4'9" mm 2914 3075 3075 2965 3126 3126 2720 2881 2881 ft/in 9'6" 10'1" 10'1" 9'8" 10'3" 10'3" 8'11" 9'5" 9'5" mm 8561 8733 8733 8612 8784 8784 8367 8539 8539 ft/in 28'2" 28'8" 28'8" 28'4" 28'10" 28'10" 27'6" 28'1" 28'1" mm 5831 5831 5831 5879 5879 5879 5641 5641 5641 ft/in 19'2" 19'2" 19'2" 19'4" 19'4" 19'4" 18'7" 18'7" 18'7" mm 13 936 14 108 14 108 13 967 14 139 14 139 13 811 13 982 13 982 ft/in 45'9" 46'4" 46'4" 45'10" 46'5" 46'5" 45'4" 45'11" 45'11" kg 13 334 13 194 13 470 13 226 13 084 13 357 13 391 13 255 13 595 lb 29,389 29,079 29,689 29,150 28,838 29,440 29,515 29,214 29,963 kg 14 069 13 927 14 210 13 962 13 820 14 098 14 124 13 987 14 339 lb 31,009 30,697 31,320 30,774 30,459 31,074 31,131 30,827 31,604 kg 11 432 11 291 11 551 11 329 11 188 11 443 11 470 11 333 11 653 lb 25,196 24,887 25,458 24,970 24,659 25,222 25,281 24,979 25,684 kg 12 188 12 047 12 311 12 088 11 945 12 206 12 225 12 087 12 419 lb 26,864 26,552 27,135 26,642 26,327 26,902 26,944 26,640 27,371 202 lbf 35,483 35,247 38,308 34,128 33,891 36,751 41,637 41,401 45,487 kg 20 512 20 620 20 463 20 566 20 674 20 517 20 726 20 834 20 677 lb 45,208 45,446 45,100 45,327 45,565 45,219 45,680 45,918 45,572 kN 157 156 170 151 150 163 185 184 mm 88 88 58 88 88 58 88 88 58 in 3.5 3.5 2.3 3.5 3.5 2.3 3.5 3.5 2.3

23

Dump clearance at maximum lift and 45° discharge (§)

Reach at maximum lift and 45° discharge (§) Reach at level lift arm and bucket level (§)

Digging depth (§)

Overall length

Overall height with bucket at maximum lift Loader clearance circle with bucket at carry position (§)

Static tipping load, straight (ISO)* Static tipping load, Static tipping load, articulated (ISO)* Static tipping load, straight (rigid tire)*

articulated (rigid tire)*

Breakout force** (§)

Operating weight*

* *Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression. **Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C. (§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C governing loader ratings. (ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing. (Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.

NOTE: Bucket availability varies by region. Consult your local dealer for availability.

Edition 47 23-183