Caterpillar Performance Handbook, January 2017, SEBD0351-47

First page Table of contents Previous page 1813 Next page Last page

Performance Data ● 962K

Wheel Loaders IntegratedToolcarriers

BucketType

Material Handling — Fusion QC

Bolt-on Cutting Edges

Teeth & Segments Teeth

EdgeType

Capacity — rated (§)

2.70 3.53 2.20 2.88

2.50 3.27 2.00 2.62

2.90 3.79 2.40 3.14

2.70 3.53 2.20 2.88

3.10 4.05 2.61 3.41

2.90 3.79 2.44 3.19

m 3 yd 3 m 3 yd 3

Capacity — struck (§)

Width (§)

mm 2927 2994 2994 2927 2994 2994 2927 2994 2994 ft/in 9'7" 9'9" 9'9" 9'7" 9'9" 9'9" 9'7" 9'9" 9'9" mm 3070 2944 2944 3027 2902 2902 2996 2870 2870 ft/in 10'0" 9'7" 9'7" 9'11" 9'6" 9'6" 9'9" 9'5" 9'5" mm 1248 1350 1350 1290 1393 1393 1322 1424 1424 ft/in 4'1" 4'5" 4'5" 4'2" 4'6" 4'6" 4'4" 4'8" 4'8" mm 2739 2900 2900 2799 2960 2960 2844 3005 3005 ft/in 8'11" 9'6" 9'6" 9'2" 9'8" 9'8" 9'3" 9'10" 9'10" mm 8386 8558 8558 8446 8618 8618 8491 8663 8663 ft/in 27'7" 28'1" 28'1" 27'9" 28'4" 28'4" 27'11" 28'6" 28'6" mm 5634 5634 5634 5697 5697 5697 5734 5734 5734 ft/in 18'6" 18'6" 18'6" 18'9" 18'9" 18'9" 18'10" 18'10" 18'10" mm 13 822 13 994 13 994 13 858 14 030 14 030 13 886 14 058 14 058 ft/in 45'5" 45'11" 45'11" 45'6" 46'1" 46'1" 45'7" 46'2" 46'2" kg 13 244 13 108 13 434 13 132 12 995 13 317 13 035 12 897 13 219 lb 29,190 28,891 29,609 28,943 28,641 29,352 28,729 28,426 29,136 kg 13 961 13 824 14 160 13 851 13 713 14 046 13 756 13 617 13 949 lb 30,771 30,470 31,210 30,529 30,225 30,957 30,318 30,012 30,744 kg 11 342 11 207 11 514 11 237 11 100 11 405 11 145 11 008 11 312 lb 24,999 24,700 25,378 24,767 24,465 25,137 24,565 24,261 24,933 kg 12 082 11 945 12 262 11 978 11 840 12 155 11 888 11 749 12 064 lb 26,628 26,327 27,026 26,401 26,097 26,790 26,202 25,896 26,589 180 lbf 40,950 40,714 44,677 38,931 38,695 42,307 37,518 37,282 40,662 kg 20 732 20 840 20 683 20 784 20 892 20 735 20 833 20 941 20 784 lb 45,693 45,931 45,585 45,807 46,045 45,699 45,915 46,153 45,807 kN 182 181 198 173 172 188 166 165 mm 88 88 58 88 88 58 88 88 58 in 3.5 3.5 2.3 3.5 3.5 2.3 3.5 3.5 2.3

Dump clearance at maximum lift and 45° discharge (§)

Reach at maximum lift and 45° discharge (§) Reach at level lift arm and bucket level (§)

Digging depth (§)

Overall length

Overall height with bucket at maximum lift Loader clearance circle with bucket at carry position (§)

Static tipping load, straight (ISO)* Static tipping load, Static tipping load, articulated (ISO)* Static tipping load, straight (rigid tire)*

articulated (rigid tire)*

Breakout force** (§)

Operating weight*

* *Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression. **Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C. (§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C governing loader ratings. (ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing. (Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.

NOTE: Bucket availability varies by region. Consult your local dealer for availability.

23-186 Edition 47

Made with FlippingBook