Caterpillar Performance Handbook, January 2017, SEBD0351-47

Performance Data ● 972K

Wheel Loaders IntegratedToolcarriers

BucketType

General Purpose — Fusion QC Material Handling — Pin On

Rock — Pin On***

Bolt-on Cutting Edges

Bolt-on Cutting Edges

Bolt-on Cutting Edges

Teeth & Segments Teeth

Teeth & Segments Teeth

Teeth & Segments Teeth

EdgeType

Capacity — rated (§)

5.00 6.54 4.30 5.62

5.00 6.54 4.30 5.62

4.80 6.28 4.10 5.36

4.60 6.02 3.90 5.10

4.60 6.02 3.90 5.10

4.40 5.75 3.70 4.84

3.60 4.71 3.10 4.05

3.60 4.71 3.10 4.05

3.40 4.45 2.90 3.79

m 3 yd 3 m 3 yd 3

Capacity — struck (§)

Width (§)

mm 3220 3271 3271 3220 3271 3271 3252 3252 3252 ft/in 10'6" 10'8" 10'8" 10'6" 10'8" 10'8" 10'8" 10'8" 10'8" mm 3106 2951 2951 3120 2957 2957 3336 3248 3248 ft/in 10'2" 9'8" 9'8" 10'2" 9'8" 9'8" 10'11" 10'7" 10'7" mm 1440 1576 1576 1286 1413 1413 1420 1528 1528 ft/in 4'8" 5'2" 5'2" 4'2" 4'7" 4'7" 4'7" 5'0" 5'0" mm 3117 3322 3322 3014 3219 3219 2964 3104 3104 ft/in 10'2" 10'10" 10'10" 9'10" 10'6" 10'6" 9'8" 10'2" 10'2" mm 9291 9515 9515 9188 9412 9412 9127 9272 9272 ft/in 30'6" 31'3" 31'3" 30'2" 30'11" 30'11" 30'0" 30'6" 30'6" mm 6296 6296 6296 6162 6162 6162 6042 6042 6042 ft/in 20'8" 20'8" 20'8" 20'3" 20'3" 20'3" 19'10" 19'10" 19'10" mm 15 009 15 193 15 193 14 957 15 137 15 137 14 978 15 061 15 061 ft/in 49'3" 49'11" 49'11" 49'1" 49'8" 49'8" 49'2" 49'5" 49'5" kg 17 986 17 802 18 150 18 595 18 413 18 653 19 302 19 235 19 616 lb 39,642 39,237 40,003 40,983 40,582 41,111 42,543 42,394 43,234 kg 19 306 19 119 19 483 19 901 19 715 19 958 20 641 20 572 20 963 lb 42,552 42,138 42,941 43,862 43,453 43,988 45,494 45,342 46,202 kg 15 636 15 450 15 783 16 235 16 051 16 274 16 872 16 804 17 167 lb 34,462 34,052 34,786 35,782 35,376 35,869 37,187 37,036 37,837 kg 16 953 16 766 17 112 17 534 17 349 17 573 18 203 18 134 18 504 lb 37,366 36,952 37,716 38,646 38,237 38,732 40,120 39,968 40,783 231 lbf 41,881 41,572 44,224 45,174 44,865 47,882 50,090 49,982 52,114 kg 26 786 26 924 26 761 26 279 26 417 26 253 26 934 26 985 26 760 lb 59,036 59,340 58,980 57,918 58,222 57,862 59,361 59,473 58,977 kN 186 185 196 201 199 213 222 222 mm 103 103 4.0 73 103 4.0 103 4.0 73 44 44 4 in 4.0 2.8 2.8 1.7 1.7 0.1

Dump clearance at maximum lift and 45° discharge (§)

Reach at maximum lift and 45° discharge (§) Reach at level lift arm and bucket level (§)

Digging depth (§)

Overall length

Overall height with bucket at maximum lift Loader clearance circle with bucket at carry position (§)

Static tipping load, straight (ISO)* Static tipping load, Static tipping load, articulated (ISO)* Static tipping load, straight (rigid tire)*

articulated (rigid tire)*

Breakout force** (§)

Operating weight*

** *Static tipping loads and operating weights shown are based on a machine configuration with Michelin 26.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression. * **Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C. ***Rock bucket specifications are given on Michelin 26.5R25 XLDD2 L5 Radial tires. (§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C governing loader ratings. (ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing. (Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.

NOTE: Bucket availability varies by region. Consult your local dealer for availability.

23-196 Edition 47