Caterpillar Performance Handbook, January 2017, SEBD0351-47

Performance Data ● 980K Aggregate Package

Wheel Loaders IntegratedToolcarriers

BucketType

General Purpose — Pin On

Material Handling— Pin On

Bolt-on Cutting Edges

Bolt-on Cutting Edges

Bolt-on Cutting Edges

Teeth & Segments Teeth

Teeth & Segments Teeth

Teeth & Segments Teeth

EdgeType

Capacity — rated (§)

5.70 7.46 4.50 5.89

5.70 7.46 4.50 5.89

5.30 6.93 4.30 5.62

6.00 7.85 5.30 6.93

6.00 7.85 5.30 6.93

5.80 7.59 5.10 6.67

5.70 7.46 5.06 6.62

5.70 7.46 5.06 6.62

5.50 7.19 4.86 6.36

m 3 yd 3 m 3 yd 3

Capacity — struck (§)

Width (§)

mm 3447 3535 3535 3447 3535 3535 3447 3535 3535 ft/in 11'3" 11'7" 11'7" 11'3" 11'7" 11'7" 11'3" 11'7" 11'7" mm 3204 3037 3037 3187 3019 3019 3105 2928 2928 ft/in 10'6" 9'11" 9'11" 10'5" 9'10" 9'10" 10'2" 9'7" 9'7" mm 1604 1738 1738 1625 1760 1760 1519 1641 1641 ft/in 5'3" 5'8" 5'8" 5'4" 5'9" 5'9" 4'11" 5'4" 5'4" mm 3124 3336 3336 3152 3364 3364 3149 3361 3361 ft/in 10'3" 10'11" 10'11" 10'4" 11'0" 11'0" 10'4" 11'0" 11'0" mm 9593 9834 9834 9621 9862 9862 9618 9859 9859 ft/in 31'6" 32'4" 32'4" 31'7" 32'5" 32'5" 31'7" 32'5" 32'5" mm 6243 6243 6243 6269 6269 6269 6242 6242 6242 ft/in 20'6" 20'6" 20'6" 20'7" 20'7" 20'7" 20'6" 20'6" 20'6" mm 15 898 16 123 16 123 15 913 16 138 16 138 15 911 16 137 16 137 ft/in 52'2" 52'11" 52'11" 52'3" 53'0" 53'0" 52'3" 53'0" 53'0" kg 23 011 22 826 23 262 22 869 22 683 23 116 22 514 22 331 22 749 lb 50,717 50,308 51,271 50,404 49,994 50,949 49,621 49,217 50,139 kg 24 485 24 298 24 753 24 346 24 158 24 609 23 945 23 760 24 194 lb 53,967 53,554 54,557 53,659 53,245 54,239 52,774 52,367 53,325 kg 20 261 20 075 20 489 20 123 19 937 20 347 19 810 19 627 20 024 lb 44,656 44,247 45,158 44,353 43,943 44,846 43,662 43,258 44,132 kg 21 597 21 409 21 839 21 462 21 274 21 700 21 106 20 921 21 332 lb 47,600 47,186 48,133 47,302 46,888 47,827 46,519 46,111 47,017 234 lbf 50,542 50,003 53,707 49,551 49,016 52,596 49,662 49,126 52,720 kg 32 020 32 159 31 983 32 116 32 255 32 079 32 145 32 284 32 108 lb 70,572 70,877 70,490 70,784 71,089 70,702 70,848 71,153 70,766 kN 224 222 239 220 218 234 221 218 mm 103 103 4.0 68 103 4.0 103 4.0 68 103 4.0 103 4.0 68 in 4.0 2.6 2.6 2.6

23

Dump clearance at maximum lift and 45° discharge (§)

Reach at maximum lift and 45° discharge (§) Reach at level lift arm and bucket level (§)

Digging depth (§)

Overall length

Overall height with bucket at maximum lift Loader clearance circle with bucket at carry position (§)

Static tipping load, straight (ISO)* Static tipping load, Static tipping load, articulated (ISO)* Static tipping load, straight (rigid tire)*

articulated (rigid tire)*

Breakout force** (§)

Operating weight*

* *Static tipping loads and operating weights shown are based on a machine configuration with Michelin 29.5R25 XLDD1 L4 Radial tires, full fluids, operator, standard counterweight, standard transmission, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression. **Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C. (§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C governing loader ratings. (ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing. (Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.

NOTE: Bucket availability varies by region. Consult your local dealer for availability.

Edition 47 23-201