Caterpillar Performance Handbook, January 2017, SEBD0351-47

Machine Dimensions ● 962L, 962M

Wheel Loaders IntegratedToolcarriers

23

Dimensions shown represent standard machine with bucket, bolt-on cutting edge, and standard tires.

◆ Varies with Bucket Size and/or Bucket Configuration — Refer to Performance Data.

962L

962M

General Purpose Bolt-on Edges

General Purpose Bolt-on Edges

MODEL

4.3 yd 3

3.3 m 3

4.3 yd 3

3.3 m 3

A Height to top of exhaust pipe

3412 mm 2694 mm 3443 mm 642 mm 3007 mm 4182 mm 5690 mm 1675 mm 3350 mm 744 mm 8489 mm 1299 mm 90 mm

3424 mm 2694 mm 3443 mm 690 mm 3055 mm 4237 mm 5787 mm 1675 mm 3350 mm 746 mm 8574 mm 1392 mm 88 mm

11'2" 8'10" 11'4"

11'3" 8'10" 11'4"

B Height to top of engine compartment

C Height to top of ROPS

D Hinge pin height at carry position ◆ E Dump clearance at full lift and 45° discharge angle

2'1"

27"

9'10" 13'9" 18'8"

10'0"

F Hinge pin height at full lift ◆ G Maximum overall height ◆ H Maximum digging depth

13'10"

19'0"

3.5" 5'6"

3.5" 5'6"

J Machine center point to axle

K Wheel base L Radius of tire

11'0"

11'0"

2'5"

29"

◆ M Maximum overall length

27'11"

28'2"

◆ N Reach at full lift

4'3"

4'6"

O Maximum rollback at maximum lift P Maximum rollback at carry height Q Maximum rollback at ground

60° 49° 40°

55° 51° 46°

Ground clearance (std. tires) Tread width (std. tires) Width over tires (std. tires) Tires used for measurements

365 mm 2140 mm 2814 mm

385 mm 2140 mm 2790 mm

1'2" 7'0" 9'3"

1'3" 7'0" 9'2"

L3 Michelin XHA2

L3 Michelin XHA2

These machines are only available in certain regions. Contact your local Cat dealer for product availability.

Edition 47 23-249