Caterpillar Performance Handbook, January 2017, SEBD0351-47

Machine Dimensions ● 966K, 972K, 980K

Wheel Loaders IntegratedToolcarriers

23

Dimensions shown represent standard machine with bucket, bolt-on cutting edge, and standard tires.

◆ Varies with Bucket Size and/or Bucket Configuration — Refer to Performance Data.

966K

972K

980K

General Purpose Bolt-on Edges

General Purpose Bolt-on Edges

General Purpose Bolt-on Edges

MODEL

5.49 yd 3

4.8 m 3

6.3 yd 3

5.4 m 3

7.1 yd 3

4.2 m 3

A Height to top of exhaust pipe

3518 mm 2828 mm 3547 mm 640 mm 2991 mm 4234 mm 5902 mm 124 mm 2187 mm 3450 mm 799 mm 8691 mm 1388 mm

3518 mm 2828 mm 3547 mm 689 mm 3154 mm 4456 mm 6031 mm 103 mm 2473 mm 3450 mm 800 mm 9223 mm 1392 mm

3737 mm 3109 mm 3809 mm 673 mm 3273 mm 4539 mm 6421 mm 103 mm 1850 mm 3700 mm 885 mm 9509 mm 1556 mm

11'6"

11'6"

12'4" 10'2" 12'6"

B Height to top of engine compartment

9'3"

9'3"

C Height to top of ROPS

11'7"

11'7"

D Hinge pin height at carry position ◆ E Dump clearance at full lift and 45° discharge angle

2'1"

2'3"

2'0"

9'9"

10'4" 14'7" 19'10"

10'8"

F Hinge pin height at full lift ◆ G Maximum overall height ◆ H Maximum digging depth

13'10"

14'11" 21'1"

19'5"

4.9" 7'2"

4"

4"

J Machine center point to axle

8'1"

6'1"

K Wheel base L Radius of tire

11'3"

11'3"

12'1"

31"

31"

35"

◆ M Maximum overall length

28'7"

30'4"

31'3"

◆ N Reach at full lift

4'6"

4'6"

5'1"

O Maximum rollback at maximum lift P Maximum rollback at carry height Q Maximum rollback at ground

62° 50° 42°

56° 50° 41°

61° 49° 41°

Ground clearance (std. tires) Tread width (std. tires) Width over tires (std. tires) Tires used for measurements

475 mm 2.23 m 3.00 m

475 mm 2.23 m 3.00 m

460 mm

1'6" 7'4"

1'6" 7'4"

1'6" 8'0"

2.44 m 3.25 m

9'10"

9'10"

10'8"

L3 Michelin XHA2

L3 Michelin XHA3

L4 Michelin XLDD1

These machines are only available in certain regions. Contact your local Cat dealer for product availability.

Edition 47 23-253