Caterpillar Performance Handbook, January 2017, SEBD0351-47

Bucket Selection ● 910K — Standard Lift

Wheel Loaders IntegratedToolcarriers

910K — Standard Lift

kg/m3 1000 1050 1100 1150 1200 1250 1450 1500 1550 1600 1650 1700 1750 lb/yd3 1685 1769 1854 1938 2022 2106 2443 2528 2612 2696 2780 2865 2949 m3 yd3

Bucket Fill Factor

1.3 1.4 1.6 1.8 1.9 1.3 1.3 1.5 1.6 1.7 1.9 1.3 1.5 1.7 1.9

112% 109% 105% 102% 99%

1.7 1.8 2.1 2.4 2.5 1.7 1.7 2.0 2.1 2.2 2.5 1.7 2.0 2.2 2.5

111% 108% 104% 101% 98% 95%

111%

96%

Pin On

23

111% 106% 102% 98%

115% 109% 104% 100% 96%

114% 110% 107% 104% 101% 98% 114% 111% 107% 104% 101% 98%

101% 98% 94%

IT

114% 109% 94%

111% 106% 102%

General Purpose

110% 104% 100% 95%

111% 108% 104% 101% 98% 96%

114% 98% 95%

ISO

113% 108% 103% 99%

107% 101% 97%

Material density and fill factor are key variables when choosing the appropriate size of the bucket.The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the Cat Optimized Z-bar Loader will demonstrate fill factors greater than 100% ISO rated. Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection table for bucket sizing.

910K — Standard Lift Fill Factors

Materials

Density

Fill %

Earth and rock Sand & gravel

~ 1800 kg/m3 ~ 1700 kg/m3 ~ 1600 kg/m3 ~ 750 kg/m3 ~ 500 kg/m3

~ 3033 lb/yd 3 ~ 2865 lb/yd 3 ~ 2696 lb/yd 3 ~ 1264 lb/yd 3 ~ 843 lb/yd 3

~ 115% ~ 115% ~ 105% ~ 100% ~ 100%

Aggregates Bulk grains Woodchips

Edition 47 23-327