Caterpillar Performance Handbook, January 2017, SEBD0351-47

Dimensions

Millyards Stationary Mount Knuckleboom Loaders

519 SM

Resilient Pad System

Loader Frame

624.8 cm (20'6") Maximum

243.8 cm (96") Tailswing

Mounting Bolt

Locknut

288.3 cm (9'5.5")

Washer Shock Pad

262.9 cm (8'7.5")

17.8 cm (7") Minimum

100.3 cm (3'3.5")

Shock Pad

Optional 76.2 cm (30") Sub-frame Riser

A B

A 77.5 cm (30.5") B 76.2 cm (30")

Base Plate

A B

25.4 cm (10") Minimum

NOTE: Overall height dimension to 8.2 m (27'0") boom articulation point is taken with main boom cylinder fully extended. Add 76.2 cm (30") to this dimension for 9.1 m (30'0") knuckleboom.

A 5.1 cm (2.0") Minimum B 6.3 cm (2.5") Minimum

Steel Platform (supplied by customer)

569 SM

● Operator’s cab is not present on EHC models. ● EHC models available with Remote Power Packs. ● Installations on concrete include “J” Bolts in lieu of Mounting Bolt. ● Continuous rotation units require 76.2 cm (30") min- imum working clearance beneath subframe or collec- tor ring and wiring maintenance. ● The customer is responsible for the design and engi- neering of all mounting systems and Caterpillar Forest Products recommends that the customer employs an engineer to perform this work. ● For additional installation guidelines refer to the Steel or Concrete information drawing for the stationary mount loader being installed. These information drawings along with engineering data to assist in the design of the support structure for the stationary mount loader are available from Caterpillar Forest Products upon request by the authorized dealer.

660.4 cm (21'8")

238.7 cm (94") Tailswing

266.7 cm (8'9")

251.5 cm (8'3")

Optional 76.2 cm (30") Sub-frame Riser

A B C

A 76.2 cm (30") B 77.5 cm (30.5") C 27.9 cm (11")

NOTE: Overall height dimension to 9.1 m (30'0") boom articulation point is taken with main boom cylinder fully extended. Add 106.9 cm (42") to this dimension for 10.9 m (36'0") knuckleboom.

5-90 Edition 47