Caterpillar Performance Handbook, January 2017, SEBD0351-47

Load Capacity Curves ● 926M

Millyards Wheel Loaders

926M* with Fusion Coupler — Cat 1829 mm (72") Log and Lumber Fork Tine Length 1829 mm

72.0" 36.0"

Load Center

914 mm 5991 kg 5134 kg 2567 kg 3080 kg 4107 kg 1590 mm 788 mm 1755 mm 3656 mm 13 615 kg

StaticTipping Load — Straight (Forks Level) StaticTipping Load — Articulated (Forks Level)

13,204 lb 11,315 lb

Rated Load (SAE J1197 — 50% FTSTL)

5658 lb 6789 lb 9052 lb

Rated Load (CEN EN 474-3 RoughTerrain — 60% FTSTL) Rated Load (CEN EN 474-3 Firm and Level Ground — 80% FTSTL)

Reach with Arms Horizontal and Forks Level

62.6" 31.0" 69.1"

Reach with Fork at Maximum Height

Ground toTop of Tine with Arms Horizontal and Fork Level Ground toTop of Tine at Maximum Height and Fork Level

143.9"

OperatingWeight

30,007 lb

*Meets Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) emission standards.

CAPACITY (kg) (Calculated Load at CG Point)

907

1814 2721 3629 4536 5443 6350 7257 8165 9072 9979

192

4877

168

4267

3658

144

3048

120

2438

96

1829

72

1219

48

610

24

0 HINGE (B) PIN HEIGHT (in)

HINGE (B) PIN HEIGHT (mm)

0

2000 4000 6000 8000 10000 12000 14000 16000 18000 20000 22000 24000

CAPACITY (lb) (Calculated Load at CG Point)

KEY

Payload (SAE J1197) Payload (CEN EN 474-3 RoughTerrain) Payload (CEN EN 474-3 Firm and Level) StaticTipping Load — Articulated StaticTipping Load — Straight HydraulicTilt Capacity (LevelTool) Hydraulic Lift Capacity (LevelTool)

Curves based on machine with Michelin 20.5R25 XHA2 tires, logger counterweight, additional guarding, 80 kg (176 lb) operator, full fuel tank, and 399-0708 log and lumber fork with 1829 mm (72") tines.

5-96 Edition 47