Caterpillar Performance Handbook, January 2017, SEBD0351-47

Load Capacity Curves ● 926M

Millyards Wheel Loaders

926M* with Fusion Coupler — Cat 2438 mm (96") Log and Lumber Fork Tine Length 2438 mm

96.0" 48.0"

Load Center

1219 mm 5358 kg 4578 kg 2289 kg 2747 kg 3662 kg 1590 mm 788 mm 1755 mm 3656 mm 13 710 kg

StaticTipping Load — Straight (Forks Level) StaticTipping Load — Articulated (Forks Level)

11,809 lb 10,090 lb

Rated Load (SAE J1197 — 50% FTSTL)

5045 lb 6054 lb 8072 lb

Rated Load (CEN EN 474-3 RoughTerrain — 60% FTSTL) Rated Load (CEN EN 474-3 Firm and Level Ground — 80% FTSTL)

Reach with Arms Horizontal and Forks Level

62.6" 31.0" 69.1"

Reach with Fork at Maximum Height

Ground toTop of Tine with Arms Horizontal and Fork Level Ground toTop of Tine at Maximum Height and Fork Level

143.9"

OperatingWeight

30,217 lb

*Meets Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) emission standards.

CAPACITY (kg) (Calculated Load at CG Point)

907

1814 2721 3629 4536 5443 6350 7257 8165 9072 9979

192

4877

168

4267

3658

144

3048

120

96

2438

1829

72

48

1219

24

610

0 HINGE (B) PIN HEIGHT (in)

HINGE (B) PIN HEIGHT (mm)

0

2000 4000 6000 8000 10000 12000 14000 16000 18000 20000 22000 24000

CAPACITY (lb) (Calculated Load at CG Point)

KEY

Payload (SAE J1197) Payload (CEN EN 474-3 RoughTerrain) Payload (CEN EN 474-3 Firm and Level) StaticTipping Load — Articulated StaticTipping Load — Straight HydraulicTilt Capacity (LevelTool) Hydraulic Lift Capacity (LevelTool)

Curves based on machine with Michelin 20.5R25 XHA2 tires, logger counterweight, additional guarding, 80 kg (176 lb) operator, full fuel tank, and 464-8153 log and lumber fork with 2438 mm (96") tines.

5-102 Edition 47