Caterpillar Performance Handbook, January 2017, SEBD0351-47

Load Capacity Curves ● 930M

Millyards Wheel Loaders

930M* with Fusion Coupler — Cat 1.9 m 2 (20.4 ft 2 ) Sorting Grapple End Area

1.9 m 2

20.4 ft 2

Load Center

610 mm 6526 kg 5488 kg 2744 kg 3293 kg 4390 kg 1561 mm 760 mm 1684 mm 3586 mm 15 132 kg

24.0"

StaticTipping Load — Straight (Forks Level) StaticTipping Load — Articulated (Forks Level)

14,383 lb 12,096 lb

Rated Load (SAE J1197 — 50% FTSTL)

6048 lb 7257 lb 9676 lb

Rated Load (CEN EN 474-3 RoughTerrain — 60% FTSTL) Rated Load (CEN EN 474-3 Firm and Level Ground — 80% FTSTL)

Reach with Arms Horizontal and Forks Level

61.5" 29.9" 66.3"

Reach with Fork at Maximum Height

Ground toTop of Tine with Arms Horizontal and Fork Level Ground toTop of Tine at Maximum Height and Fork Level

141.2"

OperatingWeight

33,351 lb

*Meets Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) emission standards.

CAPACITY (kg) (Calculated Load at CG Point)

907

1814 2721 3629 4536 5443 6350 7257 8165 9072 9979

192

4877

168

4267

3658

144

3048

120

2438

96

1829

72

1219

48

610

24

0 HINGE (B) PIN HEIGHT (in)

HINGE (B) PIN HEIGHT (mm)

0

2000 4000 6000 8000 10000 12000 14000 16000 18000 20000 22000 24000

CAPACITY (lb) (Calculated Load at CG Point)

KEY

Payload (SAE J1197) Payload (CEN EN 474-3 RoughTerrain) Payload (CEN EN 474-3 Firm and Level) StaticTipping Load — Articulated StaticTipping Load — Straight HydraulicTilt Capacity (LevelTool) Hydraulic Lift Capacity (LevelTool)

Curves based on machine with Michelin 20.5R25 XHA2 tires, logger counterweight, additional guarding, 80 kg (176 lb) operator, full fuel tank, and 458-3462 1.9 m 2 (20.4 ft 2 ) sorting grapple with 1219 mm (48") tines.

5-108 Edition 47