Caterpillar Performance Handbook, January 2017, SEBD0351-47

Load Capacity Curves ● 980H

Millyards Wheel Loaders

980H LOG Millyard Fork, Pin-On

CAPACITY (kg) (Calculated Load at CG Point)

9072

11340

13608

15876

18144

20412

22680

24948

27216

6804

5080

200

4572

180

4064

160

3556

140

3048

120

2540

100

2032

80

1524

60

1016

40

508

20

0 HINGE (B) PIN HEIGHT (in)

0

HINGE (B) PIN HEIGHT (mm)

15000

20000

25000

30000

35000

40000

45000

50000

55000

60000

CAPACITY (lb) (Calculated Load at CG Point)

KEY

Payload (SAE J1197) Payload (CEN EN 474-3 RoughTerrain) Payload (CEN EN 474-3 Firm and Level) StaticTipping Load — Articulated StaticTipping Load — Straight

HydraulicTilt Capacity Hydraulic Lift Capacity

NOTE: Static tipping loads and operating weight are based on the following loader configuration: L3 Michelin XHATires, Air Conditioning, Ride Control, PowerTrain Guard, Full Fluids, Fuel Tank, Coolant, Lubricants, and Operator. Specifications and ratings conform to the following standards: SAE* J1197, SAE J732, CEN** EN 474-3. The rated operating load for a loader equipped with a pallet fork is determined by: • SAE J1197: 50% of full turn static tipping load or hydraulic limit. • CEN EN 474-3: 60% of full turn static tipping load on rough terrain or hydraulic limit. • CEN EN 474-3: 80% of full turn static tipping load on firm and level ground or hydraulic limit. *SAE — Society of Automotive Engineers **CEN — European Committee for Standardization

The 980H is not available in all regions. Contact your local Cat dealer for product availability.

5-118 Edition 47