Caterpillar Performance Handbook, January 2017, SEBD0351-47

Cat Carrier Matching Guide

Hydraulic Hammers

H95E s H110E s H115E s H120E s H130E s H140E s H160E s H180E s

Carrier weight Minimum

mt

7.0 42.0 lb 15,400 24,300 26,500 35,300 39,700 52,920 70,600 92,600 76.0 lb 30,900 39,700 44,100 59,500 79,400 92,600 121,300 167,600 11.0 12.0 16.0 18.0 24.0 32.0 mt 14.0 18.0 20.0 27.0 36.0 42.0 55.0

Maximum

Wheeled Excavators M313C/M313D

• • •

• • • • •

M315C/M315D M316C/M316D M318C/M318D M322C/M322D

• • • •

• •

Skid Steer and Multi-Terrain Loaders 216B2/216B3 226B2/226B3 236B3/236D 242B3/242D 246C/246D

8

247B2/247B3 252B2/252B3 257B3/257D 259B3/259D 262C2/262D 272D/272D XHP

277C2/277D 279C2/279D 287C2/287D 289C2/289D 297C 299C/299D/299D XHP BH30/BH30W BH150/BH160 Backhoe Loaders 416E/416F Backhoes

• • • • •

420E/420F 430E/430F

446D

• •

450E/450F

*Installation of add-on optional counterweight to machine is required. **Hydraulic flows and pressures must be checked to verify they match the requirements for the hammer being installed. NOTE: Caterpillar recommends the use of a suitable shield/guard system to insure operator has adequate protection from flying debris. NOTE: These matches are for general reference purposes for Cat machines only.When special boom and quick coupler arrangements are used, these matches may not apply. NOTE: When matching hammers to competitive carriers, selection should be made by carrier weight. Refer to the carrier range at the top of the table in order to determine the correct match.

Edition 47 8-11