Caterpillar Performance Handbook, January 2017, SEBD0351-47

Lifting Capacities ● MH3024 (Grenoble Sourced)

Material Handlers

Lift Capacities All values are in lb, bucket cylinder and linkage installed, hydraulic cab riser, work tool: none, with counterweight (9040 lb), heavy lift on.

Load point height

Load over front

Load over rear

Load over side

Load at maximum reach (sticknose/bucket pin)

Undercarriage

Boom

Stick

MH or Standard

22'4" MH

15'9" Straight Stick

15 ft

20 ft

25 ft

30 ft

35 ft

ft

Undercarriage configuration MH – stabilizers up – solid tires MH – stabilizers down – solid tires Lower (std UC) – f. stabilizer & r. dozer up Lower (std UC) – f. stabilizer & r. dozer down Lower (std UC) – f. dozer & r. stabilizer up Lower (std UC) – f. dozer & r. stabilizer down Lower (std UC) – 2 sets stabilizersup Lower (std UC) – 2 sets stabilizersdown MH – stabilizers up – solid tires MH – stabilizers down – solid tires Lower (std UC) – f. stabilizer & r. dozer up Lower (std UC) – f. stabilizer & r. dozer down Lower (std UC) – f. dozer & r. stabilizer up Lower (std UC) – f. dozer & r. stabilizer down Lower (std UC) – 2 sets stabilizersup Lower (std UC) – 2 sets stabilizersdown MH – stabilizers up – solid tires MH – stabilizers down – solid tires Lower (std UC) – f. stabilizer & r. dozer up Lower (std UC) – f. stabilizer & r. dozer down Lower (std UC) – f. dozer & r. stabilizer up Lower (std UC) – f. dozer & r. stabilizer down Lower (std UC) – 2 sets stabilizersup Lower (std UC) – 2 sets stabilizersdown MH – stabilizers up – solid tires MH – stabilizers down – solid tires Lower (std UC) – f. stabilizer & r. dozer up Lower (std UC) – f. stabilizer & r. dozer down Lower (std UC) – f. dozer & r. stabilizer up Lower (std UC) – f. dozer & r. stabilizer down Lower (std UC) – 2 sets stabilizersup Lower (std UC) – 2 sets stabilizersdown MH – stabilizers up – solid tires MH – stabilizers down – solid tires Lower (std UC) – f. stabilizer & r. dozer up Lower (std UC) – f. stabilizer & r. dozer down Lower (std UC) – f. dozer & r. stabilizer up Lower (std UC) – f. dozer & r. stabilizer down Lower (std UC) – 2 sets stabilizersup Lower (std UC) – 2 sets stabilizersdown MH – stabilizers up – solid tires MH – stabilizers down – solid tires Lower (std UC) – f. stabilizer & r. dozer up Lower (std UC) – f. stabilizer & r. dozer down Lower (std UC) – f. dozer & r. stabilizer up Lower (std UC) – f. dozer & r. stabilizer down Lower (std UC) – 2 sets stabilizersup Lower (std UC) – 2 sets stabilizersdown

*18,000 *18,000 15,100 *18,000 *18,000 *18,000 *18,000 *18,000 14,500 *18,000 *18,000 *18,000 *18,000 *18,000 14,500 *18,000 *18,000 *18,000 *18,000 *18,000 14,700 *18,000 *18,000 *18,000 9700 9700 7200 *13,800 *13,800 *13,800 9500 9000 6800 *13,800 *13,800 10,700 9800 8700 6800 *13,800 *13,800 11,000 9800 9000 6900 *13,800 *13,800 13,100 6800 6800 4900 *12,300 *12,300 11,100 6600 6300 4700 *12,300 *12,300 7500 6900 6000 4700 *12,300 11,200 7700 6800 6300 4700 *12,300 11,500 9300 5500 5500 3800 11,300 11,300 9000 5300 5000 3600 10,600 10,400 6000 5500 4800 3600 *11,600 9100 6200 5400 5000 3600 10,900 9400 7500 4700 4700 3200 9800 9800 7800 4500 4200 3000 9200 9100 5200 4700 4000 3000 10,400 7900 5300 4600 4200 3000 9500 8100 6500

40 ft

14.86

13,100 13,100 9800 *18,800 *18,800 *18,800 12,800 12,100 9300 *18,800 *18,800 14,300 13,200 11,700 9300 *18,800 *18,800 14,700 13,200 12,100 9400 *18,800 *18,800 17,600

35 ft

23.43

13,400 13,400 10,100 9000 9000 6600 *19,600 *19,600 *19,600 *16,800 *16,800 14,300 13,100 12,400 9600 8800 8300 6300 *19,600 *19,600 14,700 *16,800 16,600 9800 13,600 12,000 9600 9100 8000 6300 *19,600 *19,600 15,100 *16,800 14,500 10,100 13,500 12,400 9700 9000 8300 6400 *19,600 *19,600 17,900 *16,800 14,900 12,000

28.67

30 ft

13,300 13,300 10,000 9000 9000 6700 6400 6400 4600 *19,700 *19,700 *19,700 *16,700 *16,700 14,400 12,900 12,900 10,400 13,100 12,400 9600 8800 8300 6300 6200 5900 4300 *19,700 *19,700 14,600 *16,700 16,600 9900 12,200 11,900 7000 13,500 12,000 9600 9100 8000 6300 6400 5600 4300 *19,700 *19,700 15,000 *16,700 14,500 10,100 13,700 10,400 7200 13,400 12,300 9700 9000 8300 6400 6400 5800 4400 *19,700 *19,700 17,800 *16,700 14,900 12,000 12,500 10,800 8600 12,900 12,900 9600 8800 8800 6500 6300 6300 4500 *20,400 *20,400 *20,400 *17,000 *17,000 14,100 12,800 12,800 10,300 12,700 12,000 9200 8600 8100 6200 6100 5800 4300 *20,400 *20,400 14,200 16,700 16,400 9700 12,100 11,900 6900 13,100 11,600 9200 8900 7800 6200 6400 5600 4300 *20,400 *20,400 14,600 *17,000 14,300 9900 13,600 10,400 7100 13,000 11,900 9300 8800 8100 6200 6300 5800 4300 *20,400 *20,400 17,400 *17,000 14,700 11,800 12,400 10,700 8600

25 ft

32.28

34.78

20 ft

19,800 19,800 14,400 12,200 12,200 9000 8400 8400 6100 6100 6100 4300 4600 4600 3100 4200 4200 2800 *27,800 *27,800 *27,800 *21,500 *21,500 20,100 17,200 17,200 13,700 12,600 12,600 10,100 9700 9700 7700 9000 9000 7200 19,600 18,300 13,800 12,000 11,300 8600 8200 7800 5800 5900 5600 4100 4400 4100 2900 4000 3800 2600 *27,800 *27,800 22,000 *21,500 *21,500 13,500 16,300 15,900 9300 11,900 11,700 6700 9000 8900 5000 8400 8300 4600 20,200 17,700 13,800 12,400 10,900 8600 8500 7500 5800 6200 5400 4100 4600 3900 2900 4200 3600 2600 *27,800 *27,800 22,800 *21,500 20,500 13,900 *17,500 13,900 9500 13,400 10,200 6900 10,200 7700 5200 9500 7200 4800 20,100 18,200 14,000 12,300 11,300 8700 8500 7700 5900 6100 5600 4100 4500 4100 2900 4200 3800 2600 *27,800 *27,800 27,800 *21,500 21,000 16,700 16,700 14,300 11,400 12,200 10,500 8400 9300 8000 6300 8700 7400 5900

15 ft

36.42

*Limited by hydraulic rather than tipping load. (continued on next page) Lift capacity ratings are based on ISO 10567:2007, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. The load point is the center line of the bucket pivot mounting pin on the stick. The oscillating axle must be locked. Lifting capacities are based on the machine standing on a firm uniform supporting surface. For lifting capacity including bucket and/or quick coupler, the respective weight has to be subtracted from above values. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance. Always refer to the appropriate Operation and Maintenance Manual for specific product information.

9-66 Edition 47