Caterpillar Performance Handbook, January 2017, SEBD0351-47

Performance Data ● 966K

Wheel Loaders IntegratedToolcarriers

BucketType

General Purpose — Pin On

Bolt-on Cutting Edges

Bolt-on Cutting Edges

Bolt-on Cutting Edges

Teeth & Segments Teeth

Teeth & Segments Teeth

Teeth & Segments Teeth

EdgeType

Capacity — rated (§)

3.80 4.97 3.24 4.24

3.80 4.97 3.24 4.24

3.60 4.71 3.09 4.04

4.00 5.23 3.50 4.58

4.00 5.23 3.50 4.58

3.80 4.97 3.34 4.37

4.20 5.49 3.80 4.97

4.20 5.49 3.80 4.97

4.00 5.23 3.60 4.71

m 3 yd 3 m 3 yd 3

Capacity — struck (§)

Width (§)

mm 3220 3271 3271 3220 3271 3271 3220 3271 3271 ft/in 10'6" 10'8" 10'8" 10'6" 10'8" 10'8" 10'6" 10'8" 10'8" mm 3067 2915 2915 3058 2905 2905 2991 2837 2837 ft/in 10'0" 9'6" 9'6" 10'0" 9'6" 9'6" 9'9" 9'3" 9'3" mm 1327 1467 1467 1334 1473 1473 1388 1525 1525 ft/in 4'4" 4'9" 4'9" 4'4" 4'10" 4'10" 4'6" 5'0" 5'0" mm 2739 2943 2943 2750 2955 2955 2838 3043 3043 ft/in 8'11" 9'7" 9'7" 9'0" 9'8" 9'8" 9'3" 9'11" 9'11" mm 8592 8817 8817 8604 8829 8829 8691 8916 8916 ft/in 28'3" 29'0" 29'0" 28'3" 29'0" 29'0" 28'7" 29'4" 29'4" mm 5788 5788 5788 5902 5902 5902 5902 5902 5902 ft/in 19'0" 19'0" 19'0" 19'5" 19'5" 19'5" 19'5" 19'5" 19'5" mm 14 727 14 899 14 899 14 733 14 905 14 905 14 778 14 951 14 951 ft/in 48'4" 48'11" 48'11" 48'5" 48'11" 48'11" 48'6" 49'1" 49'1" kg 16 852 16 671 16 870 16 833 16 652 16 885 16 635 16 453 16 693 lb 37,142 36,743 37,182 37,101 36,701 37,215 36,664 36,262 36,792 kg 18 071 17 886 18 074 18 062 17 877 18 113 17 855 17 669 17 913 lb 39,829 39,422 39,835 39,809 39,401 39,922 39,353 38,943 39,480 kg 14 843 14 661 14 851 14 821 14 638 14 856 14 636 14 452 14 677 lb 32,715 32,312 32,733 32,666 32,262 32,743 32,259 31,853 32,349 kg 16 034 15 849 16 028 16 021 15 836 16 056 15 828 15 642 15 869 lb 35,339 34,932 35,326 35,311 34,903 35,388 34,886 34,476 34,977 184 lbf 42,151 41,781 44,901 41,695 41,326 44,390 38,984 38,618 41,343 kg 24 081 24 218 24 055 24 133 24 270 24 107 24 189 24 326 24 163 lb 53,073 53,377 53,017 53,188 53,492 53,132 53,311 53,615 53,255 kN 187 185 199 185 183 197 173 171 mm 124 124 4.9 94 124 4.9 124 4.9 94 124 4.9 124 4.9 94 in 4.9 3.7 3.7 3.7

23

Dump clearance at maximum lift and 45° discharge (§)

Reach at maximum lift and 45° discharge (§) Reach at level lift arm and bucket level (§)

Digging depth (§)

Overall length

Overall height with bucket at maximum lift Loader clearance circle with bucket at carry position (§)

Static tipping load, straight (ISO)* Static tipping load, Static tipping load, articulated (ISO)* Static tipping load, straight (rigid tire)*

articulated (rigid tire)*

Breakout force** (§)

Operating weight*

* *Static tipping loads and operating weights shown are based on a machine configuration with Michelin 26.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression. **Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C. (§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C governing loader ratings. (ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing. (Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.

NOTE: Bucket availability varies by region. Consult your local dealer for availability.

Edition 47 23-189