Caterpillar Performance Handbook, January 2017, SEBD0351-47

Performance Data ● 966K

Wheel Loaders IntegratedToolcarriers

BucketType

General Purpose — Pin On

General Purpose — Fusion QC

Bolt-on Cutting Edges

Bolt-on Cutting Edges

Bolt-on Cutting Edges

Teeth & Segments Teeth

Teeth & Segments Teeth

Teeth & Segments Teeth

EdgeType

Capacity — rated (§)

4.60 6.02 4.05 5.30

4.60 6.02 4.05 5.30

4.40 5.75 3.90 5.10

3.80 4.97 3.24 4.24

3.80 4.97 3.24 4.24

3.60 4.71 3.09 4.04

4.20 5.49 3.80 4.97

4.20 5.49 3.80 4.97

4.00 5.23 3.60 4.71

m 3 yd 3 m 3 yd 3

Capacity — struck (§)

Width (§)

mm 3220 3271 3271 3220 3271 3271 3220 3271 3271 ft/in 10'6" 10'8" 10'8" 10'6" 10'8" 10'8" 10'6" 10'8" 10'8" mm 2977 2823 2823 3038 2886 2886 2960 2806 2806 ft/in 9'9" 9'3" 9'3" 9'11" 9'5" 9'5" 9'8" 9'2" 9'2" mm 1400 1537 1537 1362 1501 1501 1433 1571 1571 ft/in 4'7" 5'0" 5'0" 4'5" 4'11" 4'11" 4'8" 5'1" 5'1" mm 2857 3062 3062 2783 2988 2988 2893 3097 3097 ft/in 9'4" 10'0" 10'0" 9'1" 9'9" 9'9" 9'5" 10'1" 10'1" mm 8710 8935 8935 8637 8862 8862 8739 8965 8965 ft/in 28'7" 29'4" 29'4" 28'5" 29'1" 29'1" 28'9" 29'5" 29'5" mm 5874 5874 5874 5803 5803 5803 5960 5960 5960 ft/in 19'4" 19'4" 19'4" 19'1" 19'1" 19'1" 19'7" 19'7" 19'7" mm 14 787 14 961 14 961 14 743 14 917 14 917 14 794 14 970 14 970 ft/in 48'7" 49'1" 49'1" 48'5" 49'0" 49'0" 48'7" 49'2" 49'2" kg 16 631 16 447 16 792 16 279 16 099 16 440 16 015 15 834 16 167 lb 36,655 36,249 37,010 35,880 35,483 36,233 35,297 34,898 35,634 kg 17 875 17 687 18 047 17 471 17 287 17 643 17 204 17 020 17 368 lb 39,397 38,983 39,777 38,506 38,101 38,885 37,918 37,512 38,280 kg 14 622 14 436 14 771 14 292 14 111 14 438 14 047 13 865 14 186 lb 32,227 31,817 32,556 31,501 31,100 31,821 30,961 30,558 31,266 kg 15 837 15 649 15 997 15 460 15 276 15 616 15 214 15 029 15 363 lb 34,906 34,492 35,257 34,074 33,670 34,418 33,531 33,125 33,860 176 lbf 38,277 37,912 40,561 40,632 40,264 43,192 37,382 37,023 39,561 kg 24 229 24 366 24 203 24 498 24 636 24 472 24 561 24 699 24 536 lb 53,399 53,703 53,343 53,992 54,296 53,936 54,132 54,436 54,076 kN 170 168 180 180 179 192 166 164 mm 124 124 4.9 94 124 4.9 124 4.9 94 116 4.5 116 4.5 86 in 4.9 3.7 3.7 3.4

Dump clearance at maximum lift and 45° discharge (§)

Reach at maximum lift and 45° discharge (§) Reach at level lift arm and bucket level (§)

Digging depth (§)

Overall length

Overall height with bucket at maximum lift Loader clearance circle with bucket at carry position (§)

Static tipping load, straight (ISO)* Static tipping load, Static tipping load, articulated (ISO)* Static tipping load, straight (rigid tire)*

articulated (rigid tire)*

Breakout force** (§)

Operating weight*

* *Static tipping loads and operating weights shown are based on a machine configuration with Michelin 26.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression. **Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C. (§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C governing loader ratings. (ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing. (Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.

NOTE: Bucket availability varies by region. Consult your local dealer for availability.

23-190 Edition 47