Caterpillar Performance Handbook, January 2017, SEBD0351-47

Machine Dimensions ● 930M*, 938M*

Wheel Loaders IntegratedToolcarriers

23

Dimensions listed are for a machine configured with Fusion general purpose bucket, bolt-on cutting edge, heavy counterweight, additional guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 (L-3) XHA2 tires.

930M* High Lift

930M* Standard

938M* High Lift

MODEL

Bucket

2.1 m 3

2.5 m 3

2.5 m 3

2.8 yd 3

3.3 yd 3

3.3 yd 3

A Maximum overall length**

8324 mm 3000 mm 1500 mm 1993 mm 397 mm 2235 mm 3340 mm 3223 mm 685 mm 135 mm 3421 mm 692 mm 1385 mm 4073 mm 4500 mm 5740 mm

7656 mm 3050 mm 1525 mm 1968 mm 386 mm 2235 mm 3340 mm 3223 mm 685 mm 100 mm 2834 mm 467 mm 1146 mm 3462 mm 3969 mm 5273 mm

8397 mm 3050 mm 1525 mm 1968 mm 386 mm 2235 mm 3340 mm 3223 mm 685 mm 135 mm 3415 mm 686 mm 1413 mm 4223 mm 4550 mm 5853 mm

27'4" 9'10" 4'11"

25'1" 10'0"

27'7" 10'0"

B Wheel base

C Machine center point to front axle

5'0" 6'5" 1'3" 7'4"

5'0" 6'5" 1'3" 7'4"

D Rear axle to counterweight

6'6" 1'3" 7'4"

E Ground clearance***

F Height to top of engine compartment

G Height to top of ROPS*** H Height to top of stack

10'11"

10'11"

10'11"

10'7"

10'7"

10'7"

J Tire Radius (empty machine)***

2'3"

2'3"

2'3"

K Maximum digging depth (bucket level)*** L Maximum rollback at carry height M Dump clearance at full lift and 45° discharge angle** N Hinge pin height at carry position O Reach at full lift and 45° dump** P Clearance level bucket at full height*** Q Maximum hinge pin height*** R Maximum overall height*** S Full dump at maximum lift T Maximum roll back at maximum lift

5"

4"

5"

50°

45°

50°

11'2"

9'3" 1'6" 3'9"

11'2"

2'3" 4'6"

2'3" 4'7"

13'4" 14'9" 18'9"

11'4" 13'0" 17'3"

13'10" 14'11"

19'2"

48° 53°

49° 54°

47° 53°

Tires

20.5 R25 (L-3) XHA2

20.5 R25 (L-3) XHA2

20.5 R25 (L-3) XHA2

*Meets Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) emission standards. **Varies with bucket. ***Varies with tire.

Edition 47 23-245