Caterpillar Performance Handbook, January 2017, SEBD0351-47

Machine Dimensions ● 924K, 930K

Wheel Loaders IntegratedToolcarriers

Dimensions listed are for a machine configured with general purpose pin on buckets, bolt-on cutting edges, optional counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 (L-3) XHA2 tires.

924K

930K

930K

MODEL

Standard

Standard

High Lift

Bucket

1.9 m 3

2.1 m 3

2.1 m 3

2.5 yd 3

2.7 yd 3

2.7 yd 3

A Maximum overall length*

7374 mm 3000 mm 1500 mm 1986 mm 397 mm 2235 mm 3340 mm 3223 mm 685 mm 100 mm 2857 mm 447 mm 950 mm 3526 mm 3853 mm 4997 mm

7488 mm 3000 mm 1500 mm 1993 mm 397 mm 2235 mm 3340 mm 3223 mm 685 mm 100 mm 2855 mm 458 mm 1033 mm 3580 mm 3907 mm 5122 mm

8282 mm 3000 mm 1500 mm 1993 mm 397 mm 2235 mm 3340 mm 3223 mm 685 mm 135 mm 3448 mm 692 mm 1353 mm 4173 mm 4500 mm 5715 mm

24'2" 9'10" 4'11"

24'6" 9'10" 4'11"

27'2" 9'10" 4'11"

B Wheel base

C Machine center point to front axle

D Rear axle to counterweight

6'6" 1'3" 7'4"

6'6" 1'3" 7'4"

6'6" 1'3" 7'4"

E Ground clearance**

F Height to top of engine compartment

G Height to top of ROPS** H Height to top of stack

10'11"

10'11"

10'11"

10'7"

10'7"

10'7"

J Tire Radius (empty machine)**

2'2" 3.9"

2'2" 3.9"

2'2" 5.3"

K Maximum digging depth (bucket level)** L Maximum rollback at carry height M Dump clearance at full lift and 45° discharge angle* N Hinge pin height at carry position O Reach at full lift and 45° dump* P Clearance level bucket at full height** Q Maximum hinge pin height** R Maximum overall height** S Full dump at maximum lift T Maximum roll back at maximum lift

43°

45°

51°

9'4" 1'5" 3'1"

9'4" 1'6" 3'4"

11'3"

2'3" 4'5"

11'6" 12'7" 16'4"

11'8" 12'9" 16'9"

13'8" 14'9" 18'8"

50° 53°

49° 54°

48° 53°

Tires

20.5 R25 (L-3) XHA2

20.5 R25 (L-3) XHA2

20.5 R25 (L-3) XHA2

*Varies with bucket. **Varies with tires.

23-246 Edition 47