Caterpillar Performance Handbook, January 2017, SEBD0351-47

Machine Dimensions ● 938K

Wheel Loaders IntegratedToolcarriers

23

Dimensions listed are for a machine configured with general purpose pin on buckets, bolt-on cutting edges, optional counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 (L-3) XHA2 tires.

938K

938K

MODEL

Standard

High Lift

Bucket

2.5 m 3

2.5 m 3

3.3 yd 3 24'11"

3.3 yd 3

A Maximum overall length*

7604 mm 3050 mm 1525 mm 1968 mm 386 mm 2235 mm 3340 mm 3223 mm 685 mm 100 mm 2869 mm 467 mm 1108 mm 3642 mm 3969 mm 5242 mm

8344 mm 3050 mm 1525 mm 1968 mm 386 mm 2235 mm 3340 mm 3223 mm 685 mm 135 mm 3450 mm 686 mm 1374 mm 4223 mm 4550 mm 5823 mm

27'4" 10'0"

B Wheel base

10'0"

C Machine center point to front axle

5'0" 6'5" 1'3" 7'4"

5'0" 6'5" 1'3" 7'4"

D Rear axle to counterweight

E Ground clearance**

F Height to top of engine compartment

G Height to top of ROPS** H Height to top of stack

10'11"

10'11"

10'7"

10'7"

J Tire Radius (empty machine)**

2'2" 3.9"

2'2" 5.3"

K Maximum digging depth (bucket level)** L Maximum rollback at carry height M Dump clearance at full lift and 45° discharge angle* N Hinge pin height at carry position O Reach at full lift and 45° dump* P Clearance level bucket at full height** Q Maximum hinge pin height** R Maximum overall height** S Full dump at maximum lift T Maximum roll back at maximum lift

45°

50°

9'4" 1'6" 3'7"

11'3"

2'2" 4'6"

11'11" 13'0" 17'2"

13'10" 14'11"

19'1"

49° 54°

47° 53°

Tires

20.5 R25 (L-3) XHA2

20.5 R25 (L-3) XHA2

*Varies with bucket. **Varies with tires.

Edition 47 23-247